Arizona’s monsoon season officially starts June 15 and runs through September 30. The National Weather Service is forecasting a 33 to 50 percent chance of above-normal rainfall across the state this year, and Phoenix just came off its hottest spring on record. That combination of extreme heat and heavy moisture means pool owners have about two weeks to get ahead of what’s coming.
Monsoon storms don’t give you a heads-up. One hour it’s 115 and clear, the next you’re watching a haboob roll across the Valley dropping pounds of dust into your pool. The homeowners who spend 30 minutes preparing before the season starts spend far less time and money recovering from storms than the ones who deal with problems after the fact.
Get Your Chemical Levels Dialed In Now
Walking into monsoon season with borderline chemistry is asking for trouble. A single storm can dump enough debris, dust, and rainwater into your pool to crash your chlorine levels overnight. You want a cushion built in before that happens.
Your free chlorine should be at the upper end of your target range heading into June. For most pools, that means 4 to 5 ppm rather than the minimum 3 ppm you might maintain during calmer months. CYA (stabilizer) should be at 70 to 80 ppm to protect that chlorine from UV burnoff during the long June days before storms start rolling in. If your CYA is already above 80, hold off on adding more since you’ll be adding fresh water from rain and splash-out that will dilute it naturally.
Phosphates are the other number to check. Palo verde trees are done blooming by June, but they’ve been dropping organic material into pools all spring. Phosphates above 500 ppb are fuel for algae, and when a monsoon storm dumps a load of dirt and organic debris into your water, the phosphate spike can push things over the edge fast. If your phosphates are elevated now, treat them before the season starts rather than chasing the problem all summer.
Protect Your Equipment From Power Surges
Monsoon lightning strikes cause power surges that fry pool equipment. Variable speed pumps, salt chlorine generators, automation systems, and heater control boards are all vulnerable because they have sensitive circuit boards that don’t handle voltage spikes well. A single surge can take out a $1,500 variable speed pump instantly.
If you don’t already have a surge protector on your pool equipment, now is the time. A quality whole-panel surge protector designed for pool subpanels costs $50 to $150 and takes 15 minutes to install. That’s cheap insurance against replacing equipment that costs 10 to 30 times more. If your pool runs on an automation system like an IntelliCenter, OmniHub, or AquaLink, a surge protector is especially important since those control boards are expensive to replace and often backordered.
Beyond surge protection, check that your equipment bonding and grounding are intact. Arizona’s dry soil is a poor conductor, which means grounding rods can lose effectiveness over time. If you’ve noticed your pump tripping the breaker during storms or you’re getting small shocks from the water, have an electrician verify your bonding grid before monsoon season starts.
Trim Trees and Secure Your Pool Area
Take a walk around your pool and look up. Any branches from mesquite, palo verde, or eucalyptus trees hanging over or near the pool are going to drop into the water during the first strong wind event. Monsoon microbursts regularly produce 60 to 80 mph winds, and that’s enough to snap branches that looked perfectly healthy the day before.
Trim back anything hanging within 10 feet of the pool edge. If you have mature trees close to the pool that you can’t reasonably trim, at least clear out dead branches and any limbs that are already cracked or hanging. That’s the low-hanging fruit, literally, that will otherwise end up in your skimmer basket or wrapped around your cleaner.
Patio furniture, umbrellas, and pool toys are the other concern. Monsoon winds turn unsecured items into projectiles. An umbrella that blows into the pool is an annoyance. An umbrella that blows into your pool fence and bends a panel is an expensive repair and a safety hazard. Get in the habit of securing or storing loose items whenever a storm watch is issued. The dust wall shows up 15 to 20 minutes before the rain does, and that’s your window to move things.
Check Your Drainage and Deck Slopes
Heavy monsoon rain needs somewhere to go, and if your pool deck doesn’t slope away from the pool, that somewhere is into your pool along with everything the water picked up on the way. Look at how water flows across your deck during a hard rain or when you hose it down. Water should drain away from the pool toward yard drains or landscape areas, not toward the coping.
If your deck drains are clogged with debris or filled with caliche buildup, clear them out now. A blocked deck drain during a monsoon downpour will send standing water over your coping and into the pool, carrying dirt, fertilizer, and whatever else is on your deck surface. That’s a chemistry problem and a cleanup problem rolled into one.
Also check that your pool’s water level is slightly lower than normal heading into storm season. Keeping the water an inch below the middle of your skimmer opening gives the pool room to absorb rainwater without overflowing onto the deck or flooding your equipment. If the pool does overflow after a heavy storm, the first thing to do is lower the water level back down before running the pump, since debris floating on the surface will clog your skimmer and strain your pump.
Build a Monsoon Recovery Kit
After the first big storm hits, every pool owner in Phoenix needs the same things at the same time. Pool stores get picked clean of shock, phosphate remover, and clarifier within 48 hours of a major haboob. Having a basic recovery kit stocked before the season means you can treat your pool the morning after a storm instead of driving to three stores looking for chlorine.
Keep on hand at minimum: two to three bags of cal-hypo shock (or liquid chlorine if you prefer), a bottle of phosphate remover, a clarifier, and a clean skimmer sock or fine mesh net for pulling out fine dust that your regular leaf net won’t catch. A spare pump basket and skimmer basket are also worth having since heavy debris loads can crack old baskets that were already brittle from UV exposure.
Don’t Wait for the First Storm
The pattern every year is the same. The first major monsoon event hits, thousands of pool owners scramble, service companies are booked out for days, and pool supply stores run low on essentials. The homeowners who prepared in early June are back to swimming 24 hours after a storm. The ones who didn’t are staring at a green pool for a week waiting for someone to help.
If your pool chemistry is already on the edge, your trees need trimming, or your equipment hasn’t been inspected since last year, the next two weeks are the window to get ahead of it. Picture Perfect Pool Services handles pre-monsoon equipment checks, chemical tune-ups, and full pool evaluations across Phoenix, Scottsdale, Tempe, Mesa, Chandler, Gilbert, Paradise Valley, Ahwatukee, Surprise, and Queen Creek. Call or text 623-777-2155 and we’ll make sure your pool is ready before the dust starts flying.
